Usage: Usage: Used to thin for brushing, airbrushing and brush cleaningONLY for Humbrol Enamel Finishes.The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry.
Drying Time: Gloss: 1-2 hours touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night).
Coverage: A 14ml tinlet covers approx 0.3m2 depending on thickness of application.
Clean Up: Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.
 
SPECS: Contains Preservatives: 5 Chloro-2-methyl-2H-isothiazol-3-one, 2-methyl-2H-isothiazol-3-one (3:1), 2- phenoxyethanol.
Suitable for ages 8+.
 
COMMENTS: Stir well, then shake 30 seconds. Recoat after 6 hours
Check a small area of the surface where paint is being applied for compatibility before covering the entire surface.
Warning: Contains Petroleum Distillates. Combustible, do not store near heat or flame.
Keep Out Of Reach Of Children.
Avoid breathing vapors, use in a well ventilated area.
Avoid prolonged skin contact, wear protective gloves.
If eye contact occurs, rinse with water for 5-10 minutes.
If swallowed, do not induce vomiting, seek medical attention immediately.